Duncan Cone 06 Glazes & Underglazes

This water-based formula protects design areas or colors where applied, making application of background or adjoining colors faster and easier. Just brush it on, let dry, paint and peel! Simple steps to an impressive piece!Mask 'n Peel can be used under or between opaque underglazes, glazes or nonfired acrylic colors, and under translucent underglazes. Always dampen brush or sponge thoroughly with Duncan Brush Cleaner and squeeze out excess before loading with Mask ' Peel to desired areas. Apply one good coat of Mask 'n Peel to desired areas. Allow Mask 'n Peel to dry thoroughly before applying color over it. Heavy applications of Mask 'n Peel tend to dry on the surface before drying underneath. When this occurs, Mask 'n Peel peels off in layers. For this reason, any heavy areas should be checked for traces of Mask 'n Peel before proceeding with the technique. When removing Mask 'n Peel, lift the corner of the masked area with a tool or fingernail, and use fingertips to roll the mask toward the area rather than away from it. In this way, the mask can usually be removed in one peice. Always use Mask 'n Peel in a well-ventilated area. Clean brush in Brush Cleaner and rinse in warm water immediately after use. If Mask 'n Peel should accidentally dry in the brush before it can be cleaned, soak in Antiquing Solvent or mineral spirits to loosen residue.

Mix well. Apply 2-3 coats to cone 04 bisque. Glaze fire to cone 06. Water clean up. Overglaze compatible. Non-toxic. Conforms to ASTM D-4236. Safe for food containers when fired to cone 06.