Glaze Mixing, Slip Mixing & Casting

Powerful, mixes 5 - 20 gallons. 1/2 HP DC Motor. Safe, power disconnects when mixer is raised above liquid. Variable speed 0-1700 rpm. Use standard 1/2" mixers; Jiffy, Turbo, etc. One year written warranty.

20.5" x 3.25" with a 3/8" shaft. Mixes 2-5 gallons. Up to 1,000 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.

40" x 9.75" with a 3/4" shaft. Mixes 75-100 gallons. Up to 250 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.

10" x 2.5" with a 1/4" shaft. Mixes 1-2 gallons. Up to 1200 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.

14.75" x 2.5" with a 1/4" shaft. Mixes 1-2 gallons. Up to 1200 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.

30" x 2.5" with a 1/4" shaft. Mixes 1-2 gallons. Up to 800 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.

10" x 1.25" with a 1/4" shaft. Mixes 1 pint. Up to 1200 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.

20.5" x 4.75" with a 1/2" shaft. Mixes 5-10 gallons. Up to 800 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.

40" x 5" with a 1/2" shaft. Mixes 10-50 gallons. Up to 450 RPM. Stainless Steel. It has two sets of specially welded blades. The vertical ones keep the mixing action between them, the horizontal ones employ an exclusive hydraulic-flow principle that prevents sucking air. In addition, the horizontal blades pull the high density material up from the bottom while forcing the low viscosity solvents down from the top. All stress joints are specially welded for extra strength so it is virtually impossible for them to break.

Holds 30 gallons of slip. Has removable dowels for easy tank access and cleaning. Has a flow-thru outlet system that allows the pump to run with the nozzle closed. The slip is then by-passed back into the tank, thus providing agitation. The heavy steel frame supports over 2,000 lbs. of weight. 24" x 48" x 32" high.