Water based. Gross Wt. is 8.5 lbs.

70% Leather and 30% cotton gloves. Service temperature is 450 degrees. Excellent abrasion resistance. Ship Wt. is .5 lbs.

Holds 30 gallons of slip. Has removable dowels for easy tank access and cleaning. Has a flow-thru outlet system that allows the pump to run with the nozzle closed. The slip is then by-passed back into the tank, thus providing agitation. The heavy steel frame supports over 2,000 lbs. of weight. 24" x 48" x 32" high.

Holds 30 gallons of slip. Has removable dowels for easy tank access and cleaning. Has a flow-thru outlet system that allows the pump to run with the nozzle closed. The slip is then by-passed back into the tank, thus providing agitation. The heavy steel frame supports over 2,000 lbs. of weight. 28" x 67" x 32" high.

Holds 30 gallons of slip. Has removable dowels for easy tank access and cleaning. Has a flow-thru outlet system that allows the pump to run with the nozzle closed. The slip is then by-passed back into the tank, thus providing agitation. The heavy steel frame supports over 2,000 lbs. of weight. 28" x 67" x 32" high.

The CT850 is the largest version of this design. The size is 30" x 95" x 32" high and it holds 50 gallons of slip. This model uses the SP4 internal style pump. It has a heavy duty steel frame and is not available with casters.

The Model RD30 has a unique reverse action pump that both fills and drains molds with just a flick of a switch. The utility nozzle easily controls the slip flow from a trickle to a full 5 GPM. The drain tube (attaches to the nozzle) is designed to draw in from the sides and will not harm the greenware. By using the reverse, the RD30 fills itself simply by inserting the drain tube into any slip container. The drive assembly has no bearings or seals exposed to the liquid and, as it turns, it gently mixes the slip, keeping it in ideal casting condition. The 30 gallon fiberglass tank has a steel frame with 4 heavy duty casters for greater mobility. The open drain area has 11 dowels for convenient table top casting and dumping. It has a 1/3 h.p., 110 volt motor and it is shipped fully assembled and ready for casting. 22" x 46" x overall height 44", height to top of tank 32.5".

The RD630 has all the same great features of the RD30, except it has a larger work surface. It uses the same mechanical parts as the RD30 and the RM30. There is a dumping area on both sides of the top motor frame. This area utilizes 15 removable dowels as shown. The standard machine is designed for stationary use and has no casters. 26" x 66" x an overall height of 44", height to top of tank is 32.5".

Has all the same great features of the RD30, except it has a larger work surface. It uses the same mechanical parts as the RD30 and the RM30. There is a dumping area on both sides of the top motor frame. This area utilizes 15 removable dowels as shown. 26" x 66" long, height to the top of the tank is 33".

Has a slip capacity of 50 gallons. Uses the Slip-O-Matic centrifugal pump that has no bearings or seals exposed to the slip. No other casting tables can compare to the quality that Lehman Mfg. builds into every unit. They may be over built and they may not be the cheapest to buy. When you consider the abuse they take and how long they last without a break down, they are the cheapest to own. Has a self-adjusting belt drive system. 8' x 30" x 31" high.