Cone 5-6. AMACO Sahara High Fire Glazes are compounded to match porcelain and stoneware bodies. Matt and textured glazes suitable for stoneware and transparent gloss glazes for translucent porcelain are included in this series. Can be fired in oxidation and reduction.

Cone 5-6. AMACO Sahara High Fire Glazes are compounded to match porcelain and stoneware bodies. Matt and textured glazes suitable for stoneware and transparent gloss glazes for translucent porcelain are included in this series. Can be fired in oxidation and reduction.

Cone 5-6. AMACO Sahara High Fire Glazes are compounded to match porcelain and stoneware bodies. Matt and textured glazes suitable for stoneware and transparent gloss glazes for translucent porcelain are included in this series. Can be fired in oxidation and reduction.

Cone 5-6. AMACO Sahara High Fire Glazes are compounded to match porcelain and stoneware bodies. Matt and textured glazes suitable for stoneware and transparent gloss glazes for translucent porcelain are included in this series. Can be fired in oxidation and reduction.

Cone 5-6. AMACO Sahara High Fire Glazes are compounded to match porcelain and stoneware bodies. Matt and textured glazes suitable for stoneware and transparent gloss glazes for translucent porcelain are included in this series. Can be fired in oxidation and reduction.

TH-1 is a rutile based texturizer. Is used on or under Sahara Glazes to produce a yellowish/orange crystal-type texture. Simulates reduction firing surfaces in an electric kiln. Shown on HF-21.

Arroya glazes produce a unique carved effect when fired over gloss or matte unfired glazes. The heavier the application, the larger the break-up effect and the more matte the finish. Recommended firing temperature for Arroya glazes is cone 05. These glazes must be applied to cone 04 bisque. Non-toxic but not suitable for dinnerware.

The No. 1 spray booth is constructed of steel, features a 3/4 hp motor and an increased exhaust air delivery of 1361 CFM maximum with a 0.0 static pressure. The oversized 3" flange that surrounds the front of the booth is designed to deflect any spray material from coming out around the edges. The 12" fan moves air out through a back opening where a standard 10" duct can be attached to vent to the outside. The #1 spray booth is 24"W x 26"H x 44"D with an available work area of 24"W x 26"H x 24"D and operates on 110V AC. It is supplied with the 7" AMACO? No. 5 aluminum decorating wheel and is shipped assembled. Use only with AP non-toxic glazes. Not to be used with flammable liquids.