These stands are made specifically to fit each model and come fully assembled. Constructed of heavy gauge, welded, square metal tubing, these things are tough and stable. We use metal castors so they will not develop flat spots when sitting in one place too long like rubber castors. They also have wheel locks on all 4 wheels so the kiln will not walk away from you when you lean into it to load your kiln. If your kiln is located in your garage and you want to tuck it away when you are not using it this is the perfect solution. (Always remember to unplug the kiln if you are moving it to an area that does not have the proper clearances).

These stands are made specifically to fit each model and come fully assembled. Constructed of heavy gauge, welded, square metal tubing, these things are tough and stable. We use metal castors so they will not develop flat spots when sitting in one place too long like rubber castors. They also have wheel locks on all 4 wheels so the kiln will not walk away from you when you lean into it to load your kiln. If your kiln is located in your garage and you want to tuck it away when you are not using it this is the perfect solution. (Always remember to unplug the kiln if you are moving it to an area that does not have the proper clearances).

These stands are made specifically to fit each model and come fully assembled. Constructed of heavy gauge, welded, square metal tubing, these things are tough and stable. We use metal castors so they will not develop flat spots when sitting in one place too long like rubber castors. They also have wheel locks on all 4 wheels so the kiln will not walk away from you when you lean into it to load your kiln. If your kiln is located in your garage and you want to tuck it away when you are not using it this is the perfect solution. (Always remember to unplug the kiln if you are moving it to an area that does not have the proper clearances).

Built-in splash pan models only, raises wheel head above base for oversized pots.

This control board replaces an existing board. Reduces motor noise, extra torque, & smoother pedal. Needs to be ordered at time of purchase.

14" twist and lift removable wheel head. 1/2 HP. SSX drive. Leg & shaft extensions. Reversing switch. 6-groove drive belt for smooth, quiet, powerful performance. Heavy duty, cast aluminum foot pedal. Two year warranty

Electrical Requirements: Single Phase, 240 Volts, 27.8 Amps, 6660 Watts, Copper Wire Size: 8, Breaker Size: 40, NEMA Receptacle Configuration: 6-50, 2 cubic feet of 1800F power. Inside Chamber Dimensions: 17.5" x 13.5" deep. Uses a 16" round shelf or the 8 sided full shelf (#181 - 16" x 15" x 5/8") or 4 sided half shelf (#181 half - 8" x 15" x 5/8"). Shipping Weight is 132 lbs.

Electrical Requirements: Single Phase, 208 Volts, 32 Amps, 6656 Watts, Copper Wire Size: 8, Breaker Size: 40, NEMA Receptacle Configuration: 6-50, 2 cubic feet of 1800F power. Inside Chamber Dimensions: 17.5" x 13.5" deep. Uses a 16" round shelf or the 8 sided full shelf (#181 - 16" x 15" x 5/8") or 4 sided half shelf (#181 half - 8" x 15" x 5/8"). Shipping Weight is 132 lbs.

Electrical Requirements: Single Phase, 240 Volts, 34 Amps, 8140 Watts, Copper Wire Size: 6, Breaker Size: 50, NEMA Receptacle Configuration: 6-50, 3.5 cubic feet of 1800F power. Inside Chamber Dimensions: 23.5" x 13.5" deep. Uses a 10 sided full shelf (#231 - 21" x 22" x 5/8") or 5 sided half shelf (#231 half - 10.5" x 22" x 5/8"). Shipping Weight is 180 lbs.

Electrical Requirements: Single Phase, 208 Volts, 39.1 Amps, 8140 Watts, Copper Wire Size: 6, Breaker Size: 50, NEMA Receptacle Configuration: 6-50, 3.5 cubic feet of 1800F power. Inside Chamber Dimensions: 23.5" x 13.5" deep. Uses a 10 sided full shelf (#231 - 21" x 22" x 5/8") or 5 sided half shelf (#231 half - 10.5" x 22" x 5/8"). Shipping Weight is 180 lbs.